Automatic Laminating Machine
Overview
This automatic laminating machine is suitable for laminating various breathable materials with film or aluminum foil (such as cigarette carton, wine box, aluminum foil, lunch box, cake box, etc.).
Application
Tension problems during the drying process are eliminated by use of the micro location offset via dancing roller control systems, which allow for foil (6 micron) to laminate with other various films. It provides the most stable tension even the material has passed through the dryer and been affected by the temperature.
Features
Unwinding Section:
- Lift-up & fixed type unwind stand with 3" air shaft.
- The unwind tension is sensed by load cell and compared to the set tension. The control system will increases or decreases tension according to the calculated the tension difference automatically.
Coating Section
- Steel coating roller incorporated with pressurized rubber roller assures extremely uniform coating thickness and surface smoothness.
- Glue tank with pneumatic ascend/ descend device.
Laminating Section
- Equipped with pneumatic laminating pressure roller ensure the laminating quality.
- The motor speed and tension are synchronized in motion which improves laminating quality and stability.
Drying Section
- Three zones and straight dryer provide superior drying performance.
- All rollers are driven by chain preventing from material
- 2 different options of drying: Electric heating & Gas heating.
- Equipped with auto temperature controllers and waste gas exhausted disposal system.
Rewind Section
- Rewind is driven by motor providing the most accurate control.
- The edge of the finished product is smooth after lamination by the surface winding structure.
Man-Machine Interface Control of FLM-Wet Laminating Machine
- LCD colorful touch screen and simple figure display for setting.
- Unwind & drying & rewind tension auto control.
- Meter reached auto stop function.
- Unwind auto stop and material exhausted stop function.
- Parameters memory function.
Optional Accessories
- Center guiding type web guider.
Specification
| Mechanical Speed (m/min) |
0-150 |
| Primary & Secondary Unwind Stands |
Shafted Type |
| Unwind Core Inner Diameter (mm) |
76/3” |
| Unwind Web Width (mm) |
500-1000 |
| Maximum Unwind Diameter (mm) |
700 |
| Coating method |
Rubber Roller Adhesive Coater |
| Drying System |
Electric Heating / Thermal Oil / Gas Heating |
| Laminating |
Steel Roller + Pressurized Rubber Roller |
| Rewind Stand |
Shafted & Surface Winding Type |
| Maximum Rewind Diameter (mm) |
800 |
-
Related
-
Tags
